Bộ chuyển đổi Yamatake IP50/51 series

Model number

Description

IP50AVA/AVC

Mean value computing unit, the intellpak IP50AVA/AVC is a thin, plug-in type, mean value computing unit that converts two DC sifnal inputs to a single DC output which is equivalent to the mean value of the two input signals.

IP50DCD

DC converter (non-isolation type) the intellpak IP50DCD is a thin, plug-in type, non-isolated DC converter used to amplify and convert each level of an input signal to a standard signal for a measurement control system

IP50DBE

Signal distributor, the intellpak IP50DBE/DBC is a signal distributor for supplying electric power to a 2-wire on-site transmitter and extracting standard 4-20mAdc or 1-5 Vdc signals from the transmitter.

IP50DCS

DC isolator the intellpak IP50DCS/DCE is a thin, plug-in tpe, DC isolator used to isolateinput, output and power supplies mutually, each sig nal level is isolated from the other circuits and the input signal are amplified and converted to a single standard signal that is output for use in a mea surement control system.

IP50DRA

Gradient response computing unit, thi intellpak IP50DRA/DRC is a thin, plug-in type gradient response computing unit that produces a DC signal output changing in a fixed gradient against an input DC signal. If the input signal changes at a rate higher than the gradient initially set, the output signal changes with the set gradient but follows the input if it is slower than the set gradient.

IP51FZC

Pulse isolator the intellpak IP51FZC is a thin, plug-in type pulse isolator which receives a pulse signal from each sensor or controller as an input, and processes the waveform, isolation and level conversion for the input signal to produce the most suitable pulse signal output required for a measurement control system.

IP50FLA

First order delay computing unit, the intellpak IP50FLA/FLC is a thin, plug-in type, first-order delay computing unit that produces a DC signal output after a first-order delay is processed for the DC signal input.

IP50MMS

Monitor switch the intelpak IP50MSS/MSD is a thin, plug-in type, monitor switch that generates a signal by actuating the relay contacts on and off, or an open collector output on and off if an input DC signal surpasses a set value.

IP51FVD

Pulse/DC signal converter, the intellpak IP51FVD is a thin, plug-in type, pulse/DC converter that converts an input pulse signal to an output analog signal of a voltage or current proportional to the frequency of the input pulse signal.

IP50RVA

Reverser, the intellpak IP50RVA/RVC is a thin, plug-in type, reverser that produces a DC signal output from a reversed input DC signal, for example in the case of a 4-20mA input signal, the output would be reversed to be 20mA for a 4mA input and 4mA for a 20mA input.

IP50SQA

Square root extraction computing unit, the intellpak IP50SQA/SQC is a thin, Plug-in type, square root extraction computing unit which receives a DC signal input having square-law characteristics and generates a DC signal output equivalent to the square root of the input signal.

IP51VFD

DC/pulse converter, the intellpak IP51VFD/VFS is a thin, plug-in type, DC/pulse converter which receives an input analog signal voltage or current at each level and generates an output pulse signal of a frequency proportional to the anflog value.

IP50SL

Selector the IP50SL/SH intellpak is a thin, plug-in type, selector which receives two DC signal inputs and generates an output by automatically selecting either the high signal (high selector) or the low signal (low selector).

IP50BRA

Ratio/bias setting unit, the intellpak IP50BRA/BRC is a thin, plug-in type, ratio/bias setting unit that multiplies a ratio against the DC input signal to produce anoutput signal after adding bias.

IP50TC

mV/I converter, the IP50TC/RD/PM intellpak is a thin, plug-in type, mV/I converter which receives an input signal from a thermocouple, resistance bulb or potentionmeter and then generates a DC output voltage or current.

IP51FVL

Pulse/DC converter, the intellpak IP51FVL is a thin, plug-in type, pulse/DC converter designed for extremely slow pulses, it receives a slow input pulse signal, calculates the frequency from the cycle with a built-in microprocessor, and generates an analog signal output of a voltage or current proportional to the calculated frequency.